Source: Team Associated
LRP SPX8 Competition Brushless ESC
The new SPX8 Competition Brushless Speed Control is based on one of the best and most successful competition speed controls ever — the SPHERE
Competition TC-Spec. Only the best of the best in today’s brushless racing was good enough to take it as a base for the development of the new LRP 1:8
Brushless System. These successful genes can now be found in the new SPX8 Competition Brushless. It aims to reach the peak of 1:8 brushless speed controls with its high tech features. For this reason the TC-Spec has been adapted to the specific demands of 1:8 racing. It now features special 1:8 software and has been specially optimized for use with 2S-4S LiPo batteries. The result is a high-end speed control that will excite the 1:8 electric R/C car scene.
Features
• 1:10 scale sized case – Revolutionary small size for 1:8 scale models.
• Special 1:8 Power Profiles.
• Optimized for 2S-4S LiPo battery operation.
• Large power capacitor optimized for 1:8.
• Internal-Temp-Check-System 2.
• Low-profile heat sink with integrated high-performance fan.
• Fully adjustable drive modes with different adjustment possibilities.
• Sensored Design.
UPC: 84695 99426 LRP80780 SPX8 Competition
Brushless Speed Control MSRP $339.99 Available Sept. 2009
Vector 8 Brushless Modified Motors
The new VECTOR 8 Brushless Modified is based on the IFMAR World Championship-winning X12 brushless modified technology. In the past months X12-based motors set new benchmarks when it came to outstanding performance and ultimate reliability at top-level races around the world. Now 1:8 drivers can benefit from this technology advantage as well. The Vector 8 Brushless Modified is specifically tailored for 1:8 off road racing with its longer teardown with special cooling fins, longer stack, magnet, and shaft for higher torque and maximum performance.
Features:
• 13mm Magnet: New sintered 13mm magnet size and
grade, for best efficiency and midrange torque. 5mm highstrength
output shaft with oversized bearings for the
toughest demands in 1:8 racing.
• PreciSensor TM System: Revolutionary precise sensor
positioning for best power, throttle feel, and efficiency. Fully
adjustable and replaceable.
• Re-buildable: Machined 7075 T6 aluminum can.
• Universal Fit: Fits all common 1:8 off road brushless
models. Outer diameter: 41mm, length: 66mm, shaft
strength and Multi-Mounting System.
• IFMAR World Champion Technology: XTEC X12 World
Champion Technology now available for 1:8 brushless cars.
• Air Flow and Cooling Optimized Teardown: Flow optimized
cut-outs for highest performance even on long runs.
Includes fan and holder.
• Special 1:8 winding style: Special 1:8 off road power
windings developed and tested by the LRP Factory Team.
Includes high-performance fan for maximum cooling and
unique mounting hardware for perfect installation into all R/C
cars – simply plug into the receiver!
Part number LRP50910 LRP50920
Specific rpm per volt, kV 2.500kv 2.800kv
Power (at 14.8V) 1.230W 1.360W
Weight 275g 275g
Diameter 41mm 41mm
Length 66mm 66mm
Output Shaft 5mm 5mm
UPC: 84695 99428 LRP50910 LRP Vector 8 Brushless Motor, 2500kv MSRP $249.99 Available Sept. 2009
UPC: 84695 99427 LRP50920 LRP Vector 8 Brushless Motor, 2800kv MSRP $249.99 Available Sept. 2009
LRP 1:8 Competition Combos:
UPC: 84695 99424 LRP80692 SPX8 / Vector 8 2500kv combo MSRP $549.99 Available Sept. 2009
UPC: 84695 99425 LRP80693 SPX8 / Vector 8 2800kv combo MSRP $549.99 Available Sept. 2009
